Wheels & Tires Analyzer (WTA)

Analyze the impact of changing wheels, tires, spacers and more.

Welcome to the Wheels & Tires Analyzer (WTA)!

Analyze and calculate the impact of changing your wheels, tires and spacers. This app also includes size converters, load index and more. Start in Data input, then check the analyzers.

Features

  • Data input
    Enter the OEM and new wheel and tire sizes, offset, camber, spacers, weights and car dimensions. Use the same values on both axles or set them separately.
  • Wheels & tires
    Front and rear side views and cross-sections, clearance analysis (suspension, wheel arch, fender, scrub radius, brake caliper), differences with guidelines, speedometer and odometer calibration, engine RPM, and weight & inertia.
  • Stance
    Top view with front and rear wheel zoom, track width, axle stance and fender gap, before and after.
  • Steering
    Top view with turning circle and Ackermann geometry, and how your new wheels and tires change the turning diameter and steering.
  • Tools
    Ideal rim and tire width, equivalent tire sizes (plus-sizing), converters for slick, PAX, vintage and LT sizes, DOT date code, pitch circle diameter (PCD) and hub centering ring.
  • Ratings (Speed / Load)
    Load index calculator, axle load check and load index table, plus the speed rating table.
  • Contact & Donation
    Say thanks with a donation (Ko-fi, PayPal, Pix) or send me a suggestion, comment or criticism.

On every page: metric or imperial units, three languages (English, Português, Español), light and dark themes, and customizable chart colors and line styles.

The story behind WTA

I started this work in April 2011, while studying Automotive Engineering at the Politecnico di Torino, to help my brother safely replace his car's wheels with larger ones. It began as an Excel file, and in 2026, with the help of AI (Sonnet 5.5), I was able to turn it into a Web App, add new features and make it available to everyone on the internet. I hope WTA can help you. If you would like to make a suggestion, comment, improvement, report a bug or offer any criticism, please send me a message. And if you would like to make a donation so I can keep updating it with new features, I am enormously grateful.

Thank you!

Send a message · Make a donation

Created by Pedro Fonseca · v2 (2026-11-12)

Privacy

The values you enter (vehicle, wheels, tires) stay on your device. They are saved only in your browser so you can come back later; you can erase them with “Reset to example data” or by clearing your browser data. This site may use cookie-free analytics that only count visits and which features are used, never the values you type. The donation page embeds third-party services (Ko-fi, PayPal), which have their own privacy policies. The contact form opens your email app, and nothing is sent until you press send.

If you use “Find my car”, the description you type is sent to Claude to look up the data.

Input checks

Steering inputs

Estimates from a simplified geometry (no tire slip). Real steering depends on the kingpin axis, steering arms and rack travel, which are not known here.

Ideal rim & tire

Ideal rim width

Ideal rim width:

Street usage ↔ improved cornering

Ideal tire width

Ideal tire width:

for aspect ratio 50 or higher; up to for aspect ratio 50 or lower

ATTENTION! Rim/tire fitment can vary between manufacturers. Before assembling your new kit, consult the manufacturer/association guides to verify the dimensions are approved.

Equivalent tire sizes (plus-sizing)

Uses the tire entered in "Ideal rim width" above. Lists sizes on other rim diameters with an overall diameter within ±2%.

DOT date code

Size converters

Slick / racing tire

Standard tire:

e.g. 240/650 R18 or 24/65 R18. Approximation only: the actual width is larger than nominal.

Michelin PAX

Standard tire:

Michelin PAX uses asymmetric beads, so a standard tire normally can't be fitted to a PAX rim.

Vintage alphanumeric

Standard tire:

e.g. ER70VR15 · letters C–H

LT (inch-based sizes)

Standard tire:

e.g. LT30x9.5/15

Fitment tools

Pitch circle diameter

Distance between bolts:

Hub centering ring

Load index

Each load index (LI) number maps to a weight in kg or lb: the most one tire may carry at its rated pressure. The listed value assumes speeds up to about 210 km/h (130 mph); beyond that, the allowed load can drop. To size it, split the car's weight evenly across the four wheels and add a 10–20% margin.

Axle load check

Load index table

Speed rating

A letter stamped on the sidewall that sets the top speed the tire was tested for, provided it carries no more than its rated load.

Contact

Your email app will open with the message ready to send to the address below.

If nothing opens, write directly to pedrogibran@gmail.com

Donation

Thank you for using the Wheels & Tires Analyzer! It is free and was built in my spare time. If it helped you, please consider making a donation: it helps keep the app online and lets me keep adding new features.

Ko-fi

If the widget does not load, open Ko-fi directly: ko-fi.com/pgibranf

PayPal

Donate with PayPal, using your card or PayPal balance.

Donate with PayPal

Pix (Brazil)

Scan the QR code or copy the Pix code and paste it in your bank app ("Pix Copia e Cola").